Smt Menu Items; Figure 135 Smt Main Menu; Table 88 Main Menu Summary - ZyXEL Communications P-793H User Manual

P-793H User's Guide

Figure 135 SMT Main Menu

Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Note: There is an inactivity timeout, and the default value is ten minutes. If there is no
activity for longer than this, your ZyXEL Device will automatically log you out.
You will then have to telnet into the ZyXEL Device again. You can use the web
configurator or the CI commands (menu 24.8) to change the inactivity timeout
period.

21.2 SMT Menu Items

The following table provides an overview of each menu item.

Table 88 Main Menu Summary

MENU
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
246
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
P-793H Main Menu
Enter Menu Selection Number:
FUNCTION
Use this menu to set up device mode, dynamic DNS and administrative
information.
Use this menu to configure the DSL connection, traffic redirect, and dial-
backup interface.
Use this to apply LAN filters, configure LAN DHCP and TCP/IP settings, and
to allow or block layer-2 traffic between each pair of ports.
Use this menu to configure your Internet connection.
Use this menu to configure detailed remote node settings (for example, your
ISP is a remote node) as well as apply filters.
Use this menu to configure IP and bridge (MAC) static routes.
Use this menu to configure Network Address Translation (NAT) on the
ZyXEL Device.
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy Setup
26. Schedule Setup
99. Exit
Chapter 21 Introducing the SMT