Environmental And Electrical Specifications For Cisco Ge/Fc Sfp Transceivers; Cisco Cwdm Sfp Transceivers - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Cisco mds 9100 series hardware installation guide (ol-17951-02, february 2009)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

SFP Transceiver Specifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table B-13 General Specifications for Cisco Gigabit Ethernet/Fibre Channel SFP Transceivers
Description
Connector type
Wavelength
Fiber type
Core size
Cable distance
Transmit power
1. Approximate; actual distance may vary depending on fiber quality and other factors.

Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers

Table B-14
transceivers.
Table B-14 Maximum Environmental and Electrical Ratings for Cisco GE/FC SFP Transceivers
Parameter
Storage temperature
Case temperature
Relative humidity
Module supply voltage
1. Absolute maximum ratings are those values beyond which damage to the device may occur if
2. Functional performance is not intended, device reliability is not implied, and damage to the

Cisco CWDM SFP Transceivers

Table B-15
are supported by the Cisco MDS 9140 and Cisco MDS 9120 Switch.
Table B-15 Cisco CWDM SFP Transceivers
Part Number
DS-CWDM-xxxx
DS-CWDM-MUX-4
DS-CWDM-MUX-8
DS-CWDMCHASSIS Two-slot chassis for CWDM add/drop multiplexers.
Cisco MDS 9100 Series Hardware Installation Guide
B-8
Short Wavelength
LC
850 nm
MMF
50 microns
1
300 m
-1.5 to -9.5 dBm
provides the maximum environmental and electrical ratings for Cisco GE/FC SFP
1
1, 2
1
1
these limits are exceeded for other than a short period of time. See Reliability Data Sheet for
specific reliability performance.
device may occur over an extended period of time between absolute maximum ratings and the
recommended operating conditions.
lists the CWDM SFP transceivers available through Cisco Systems. These SFP transceivers
Description
Gigabit Ethernet and 1-Gbps/2-Gbps/4-Gbps Fibre Channel SFP LC interface
xxxx where xxxx = 1470, 1490, 1510, 1530, 1550, 1570, 1590, or 1610 nm.
Add/drop multiplexer for four CWDM wavelengths.
Add/drop multiplexer for eight CWDM wavelengths.
Long Wavelength
LC
1310 nm
SMF
62.5 microns 9/125 microns
150 m
10 km
-3 to -9.5 dBm
Symbol
Min.
Max.
T
-40
100
S
T
0
85
C
RH
5
95
V
T,R
3.1
3.5
CC
Appendix B
Technical Specifications
Unit
°C
°C
%
V
OL-17951-02

Advertisement

Table of Contents
loading

Table of Contents