Installation Procedures; Connecting The Power Cord; Figure 2.3 Connecting The Power Cord; Switch On The Power - Advantech POC-S196 User Manual

2.2

Installation Procedures

2.2.1

Connecting the Power Cord

The POC-S196 can only be powered by a DC power adapter (SINPRO Model No
MPU100-107). Always handle the power cords by holding the plug ends only.
Follow these procedures in order:
1. Connect the male end of the power adapter to the DC jack of the panel PC. (See
Figure 2.3.)
2. Connect the female end of the power cord to the DC power adapter.
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
2.2.2

Switch on the Power

Switch on the reset switch on the front cover (See Figure 2.1).
POC-S196 User Manual

Figure 2.3 Connecting the power cord

10