Table of Contents
Advertisement
7.1
Introduction
The POC-S196 system needs specific utilities or hot fixes to support special func-
tions.
7.2
Wakeup by External USB Device at S3 Resume
(Wakeup)
The POC-S196 supports three different sleep (suspend) modes; they are:
1.
S1: Power On Suspend: The system will stop the clock, turn off the LCD back-
light, but keep all power on. Users can press any key (by mouse or keyboard) to
wakeup the system.
2.
S3: Suspend to RAM: The system will stop the clock, turn off most power, not
including memory, and save all necessary information to memory. In this sleep
mode, the system needs a hot fix to be able to wakeup by USB mouse or key-
board.
3.
S4: Suspend to Disk (Hibernation): The system will stop the clock, turn off most
power, including memory power, and save all necessary information on to the
hard disk. In this sleep mode, users need to press the power button to wake the
system up.
7.2.1
Installation for Windows XP
Step 1.
Double click "USBRG.REG" in the D:\Driver\USB folder.
Step 2.
Click "Yes" to update the registry with this information.
Step 3.
Click "OK" to close the window following successful installation.
7.3
Window Audio Volume Application
On the front panel of the POC-S196 system, there are two buttons to control the
speaker volume.
This speaker volume is adjustable by pressing the button and it does not require any
special software utility.
However, the speaker volume button cannot modify the Windows volume control if
the user has not installed the Advantech Audio Volume application.
7.3.1
Installation for Windows XP
Step 1.
Double click "SETUP.EXE" in the D:\Utility\Volume Control folder.
Step 2.
Click the "Next" button
Step 3.
Select "I accept the terms of the license agreement" and click the "Next" but-
ton.
Step 4.
Click "Finish" to close the complete installation window.
POC-S196 User Manual
36
Advertisement
Table of Contents
