Furuno RC-1500-1T Operator's Manual page 73

6. Select nature of distress (if known) and press the [ENT] key. (If you do no the nature of
distress, select UNDESIGNATED.)
7. Press the [ENT] key to open the POS. menu, where you enter the position of the ship in
distress and time, manually or automatically.
Send message
***
: ALL SHIPS
CALL TYPE
INPUT TYPE: AUTO
ID IN DIST
DISTRESS RELAY
LAT : 34 45 NORTH
NATURE : : 987654321
LON : 135 22 EAST
POS:
TIME: 10:00 UTC
:
COM. TYPE
DSC FREQ
GO TO ALL VIEW
8. To enter position and time automatically, when you are near the ship in distress, press the
[ENT] key, select AUTO, press the [ENT] key again and then go to step 9. For manual input,
press the [ENT] key, select MANUAL and press the [ENT] key again. Enter position and time
as follows:
Press to select LAT and press the [ENT] key. Enter latitude and press the [ENT] key.
a)
Press to select LONG and press the [ENT] key. Enter longitude and press the [ENT] key.
b)
Press
to select TIME and press the [ENT] key. Enter UTC time and press the [ENT] key.
c)
9. Press the [ENT] key to open the COM. TYPE menu.
Send message
***
CALL TYPE: RELAY ALL
ID IN DIST: 123456789
TELEPHONE
NATURE : NDESIGNATED
POS: 34˚45N
NBDP-FEC
: TELEPHONE
COM. TYPE
DSC FREQ :
GO TO ALL VIEW
10. Select TELEPHONE and press the [ENT] key.
11. Press the [ENT] key to open the DSC FREQ menu.
Send message
***
CALL TYPE
ID IN DIST:
NATURE:
:
POS: 34˚45N
: Telephone
COM. TYPE
DSC FREQ
:2187.5 kHz
***
UNDESIGNATE
: 2187.5 KHZ
***
2187.5 KHZ
***
MANUAL: For selection of frequency at radiotelephone
when there is "remote control error."
2187.5
4207.5
6312.0
3 45E
8414.5
12577.0
16804.5
: 2187.5 KHZ
MANUAL
GO TO ALL VIEW
3-19