Furuno RC-1500-1T Operator's Manual page 363

18.Press [ ].
When "Regular Interval" is selected on step 16,
(1) Press [Enter] to open the window for interval time entry.
(2) Key in the interval time at Interval Time.
(3) Press [Enter] to close the window.
(4) Press [ ].
(5) Press [Enter] to open the window for report times entry.
(6) Key in the Report times or select "No limit".
(7) Press [Enter] to close the window.
When "Daily" is selected on step 16,
(1) Press [Enter] to open the window for start time entry.
(2) Key in the start time at Start Time 1.
(3) Press [Enter] to close the window.
(4) Press [ ].
(5) If necessary, key in the start time of Start Times 2-4.
19.Press [Esc] to register the above settings.
Figure 5-3 Data report menu
20.Select "Yes".
21.Press [Enter] to close the Data Report window.
5-3