Furuno RC-1500-1T Operator's Manual page 212

1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name
Frequency (T/R) :
Comm Status
Sending Volume
5-6
4. Transmit message by one of the following methods;
Send a file from a floppy disk
a) Press function key [F7] (WRU) to receive the answerback
code of the other station. Verify that the code from the sta-
tion called is correct.
b) Press function key [F8] (HR) to transmit your own identity
(answerback code).
c) Press function key [F3] and then the [3] key to display the
Send screen. Select file to send and press the [Enter] key.
Send appears in inverse video while the file is being trans-
mitted.
Filename
<Parent Directory>
00FOX
ASCII
BEEP
DPX
DPX
DPX
DPX
29 Files exist
To select:ENTER
Figure 5-8 Send file screen
Sending volume (percentage of message transmitted, counts
upward as the message is being transmitted), ARQ error count
and ARQ transmission time appear on the display.
: CHOUSHI-8M
8765.00 / 8965.00(kHz)
: Connect Send
: 100(%) ARQ Error : 0
Figure 5-9 Communication status display
Type a message from keyboard
After exchanging answerback code by the function key [F7]
(WRU) and [F8] (HR), type your message directly from the
keyboard.
5. To change direction of traffic, press either function key [F9]
(OVER), or [+] and [?]. Then, the other station becomes the
information sending station, your station the information re-
ceiving station.
Send File
Size
.MES 95
.TXT 613
.EXE 28854
.AUT 1830
.BAT 349
.BSC 28000
.CNL 1000
247271424 bytes free
To view:SPACE
1996-11-15 14:28
Comm Mode :ARQ
Lock Error
ARQ Time : 0(sec)
Data & Time
96-11-15 12:24
96-11-15 08:07
96-11-15 16:15
96-11-15 10:36
96-11-15 10:02
96-11-15 13:54
96-11-15 17:11
96-11-15 10:02
To quit:ESC
(JST) Caps