Furuno RC-1500-1T Operator's Manual page 181

Function key [F3]: Operate menu
The Operate menu controls transmitting and receiving.
Operate
1: Call Station
2: Macro Operation
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: High Tension ON
9: Manual Calling
0: Set Frequency
Figure 2-9 Operate menu
1: Call Station
2: Macro Operation
3: File to Send
4: Cancel Sending
5: Scan Start/Stop
6: Manual Reception
7: Timer Operation
8: High Tension ON/OFF Turns on/off transmitter high volt-
9: Manual Calling
0: Set Frequency
Selects a station from the station list.
Enables fully automatic operation.
Selects a file (to transmit).
Stops sending a file.
Starts/stops frequency scanning.
Selects communication mode for re-
ception; AUTO/ARQ/FEC.
Timer programming.
age on a FURUNO radio.
Sets Tx mode and subscriber's ID
number in manual calling.
Sets Tx and Rx frequencies in
manual calling.
2-7