Furuno RC-1500-1T Operator's Manual page 408

SPECIFICATIONS OF THE SSB RADIOTELEPHONE FS-1562-25
1. GENERAL
(1) Communication System
(2) Frequency Range
(3) Class of Emission
(4) Number of Channels
(5) Power Supply
2. TRANSMITTER
(1) Frequency Range
(2) RF Output Power
(3) Power Reduction
(4) Frequency Deviation
(5) Modulation AF Response
(6) AF Input
(7) Line Input
(8) Tone Frequency
3. RECEIVER
(1) Receiving System
(2) Frequency Range
(3) Sensitivity
(4) Selectivity
(5) Spurious Response
(6) Intermodulation
(7) Audio Output
Simplex or semi-duplex
Transmit: 1.6 MHz to 26.175 MHz (100 Hz steps)
Receive: 0.1 MHz to 30.0 MHz (10 Hz steps)
J3E, J3C (for intership facsimile),
H2B, H3E (AM compatible), A3E (reception only)
F1B = J2B (for DSC, NBDP terminal),
F3C (for weather facsimile, reception only)
User channel: 200
ITU SSB/TELEX channels
2182 kHz (single action)
24 VDC: 2 A (reception), 40 A (transmission) max.
1.6 MHz to 27.5 MHz (100Hz steps)
75/100/200 Wpep (1.6 to 4 MHz)
250 Wpep (4 to 27.5 MHz)
60 W
±10 Hz
350 Hz to 2700 Hz within 6 dB
-46 dBm/600 ohms
0 dBm/600 ohms
1500 Hz
Double-conversion superheterodyne
10 kHz 29.99999 MHz (10 Hz steps)
Input level to produce SINAD 20dB, Unit: dB V
Frequency Range (MHz)
0.1 to 0.3
0.3 to 1.6
1.6 to 4
4 to 30
0.1 to 4 MHz: at 10 ohms + 250 pF, 4 to 30 MHz: at 50 ohms
J3E: 2.4 kHz at -6 dB
H3E: 0.6 kHz at -6 dB
F1B: 0.3 kHz at -6 dB
Better than 70 dB
Better than 80 dB
Internal speaker: 1 W/ 8 ohms
SP - 2
J3E H3E
+40 +54
+25 +39
+16 +30
+3
F1B
+6
-7