Furuno RC-1500-1T Operator's Manual page 380

Selecting NCS Channel
7-4
NCS channel can be selected as shown in the procedure below. Cur-
rently, each satellite transmits one global beam. In the future, the sat-
ellites will transmit multiple spot beams, namely, the NCS will have
multiple channels.
1. Press [F7] to display the Options menu.
2. Press [4] to display the Select NCS menu. The NCS Channel
List appears.
NCS channels programmed at page 2-16 appear on the list.
Figure 7-7 NCS channel list
3. Select NCS channel.
4. Press [Enter].
5. Press [Esc] to close the Update screen.
6. Press [Enter] to select "Yes".
The unit tunes to the channel selected.