Furuno RC-1500-1T Operator's Manual page 417

SPECIFICATIONS OF THE AC/DC CHANGE-OVER UNIT
1. BATTERY CHARGER (BC-6158)
(1) Applicable Battery
(2) Power Source
(3) Output for Battery
(4) Charge/discharge Meter
(5) Control Panel
2. RECTIFIER (PR-850AR)
(1) Power Source
(2) Input Current
(3) Rush Current
(4) Output Voltage
(5) Peak Output Current
(6) Ripple Voltage
(7) Insulation Resistance
3. RECTIFIER (PR-300)
(1) Power Source
(2) Input Current
(8) Rush Current
(3) Output Voltage
(4) Peak Output Current
(5) Ripple Voltage
(9) Insulation Resistance
(RADIO SWITCH BOX)
200AH Normal ship battery
100/110/115/220/230 VAC, 1 phase, 60 Hz or 24 VDC
24 VDC, 30 A nominal
built in the radio console panel
built in the radio console
100/110/200/220 VAC, 1 phase, 50-60 Hz or 24 VDC
15 A or less (AC input), 30 A or less (DC input)
80 A or less
DC24 V ±10%, 30 A
60 A (60 A output with 1 min AC or 40 A within 1 min DC)
100 mVp-p or less
500 VDC, 50 M or more between AC input and chassis
100/110/200/220 VAC, 1 phase, 50-60 Hz or 24 VDC
2 A or less (AC input), 3.1 A or less (DC input)
80 A or less
24 VDC ±10%, 7.5 A
20 A (10 A output within 2H or 20 A within 15 min)
100 mVp-p or less
500 VDC, 50 M or more between AC input and chassis
SP - 11