Furuno RC-1500-1T Operator's Manual page 416

SPECIFICATIONS OF THE PRINTER PP-510
1. GENERAL
(1) Printing System
(2) Character Composition
(3) Printing Speed
(4) Emulation
(5) Type of Characters
(6) Type of Paper
(7) Paper Holder
Maximum width
Maximum diameter
Internal diameter
Paper end sensor
(8) Paper Advance Speed
(9) Data Buffer
(10) Number of Copies
(11) Ink Ribbon
(12) Interface
(13) Noise
2. ENVIRONMENTAL CONDITION
(1) Operating Temperature
(2) Operating Relative Humidity
3. POWER SUPPLY
(1) Power Consumption
Serial Impact dot matrix
9 x 7 dot matrix
Draft: 200 characters/second, NLQ: 50 characters/second
Epson FX850 mode or IBM Proprinter II mode
324 letters (Epson FX850 mode)
262 letters (IBM Proprinter II mode)
Roll paper, type "1P", non-carbon paper 34 g/m
209 to 216mm
124mm
25mm (winding core)
Provided
1/6, 1/8 or 1/216 inch steps, 8.3 lines/sec (at 1/6" step)
21K bytes (Epson FX850 mode)
9.3K bytes (IBM Proprinter II mode)
Original plus 2 copies (Total thickness: 0.2mm or less)
Original fabric ribbon (13mm x 14m)
Parallel interface (Centronics)
Less then 59 dBA
5°C to 35°C
20% to 85% (non-condensing)
24 VDC: 1.5 A, 36 W max.
SP - 10
2