Furuno RC-1500-1T Operator's Manual page 111

9. The display now looks something like the following.
Send message
***
CALL TYPE:
STATION ID :
PRIORITY : ROUTINE
DSC FREQ : 2177.0 KHZ
GO TO ALL VIEW
10. Press the [CALL] key to send the call (transmission time: about 7 sec.). The following display
appears.
Position request
call in progress!
STATION ID :
123456789
ROUTINE
DSC FREQ :
TIME TO GO:
11. After the call has been sent (the timer counts down to zero) the following display appears.
Waiting for pos
acknowledgment.
STATION ID :
123456789
ROUTINE
DSC FREQ :
TIME TO GO:
12. One of the following messages appears. ("No response! Try calling again?" appears after the
time has counted down to zero, meaning there is no response from the receiving station.)
Pos acknowledge
call received.
FROM SHIP :
ROUTINE
POS :
12˚34N 123˚45E AT 12:34
Position acknowledge call received
***
POSITION
REQUEST
123456789
2177.0 KHZ
7S
2177.0 KHZ
4M30S
123456789
STOP ALARM
No response!
Try calling again?
STATION ID :
123456789
ROUTINE
DSC FREQ :
2177.0 KHZ
CALL AGAIN
No response
4-35