Furuno RC-1500-1T Operator's Manual page 20

[P.PARK] key
Backs the paper by maximum 18 inches. If the paper is not detected after backing it, the P. OUT
lamp blinks three times and the printer stays in off line state.
Loading roll paper
This section shows you to load the roll paper.
Observe the following cautions when loading the paper:
• To prevent paper skewing or jamming, be sure the paper is positioned correctly.
• Never turn the platen knob too fast—gears may be damaged.
Removing remaining paper
1. Press the
P. PARK
2 – 6
CAUTION
Keep fingers away from edges on the
printer and cover.
Edges can cut fingers.
Paper
Support Bar
Printer Cover
Print Head
Platen Knob
PP-510, side view
switch to back up the paper. Turn off the power.
Paper
Paper Guide Bar