Furuno RC-1500-1T Operator's Manual page 372

6-2
11. Press [ ] to select Nature. Press [Enter] to display the list. Select
appropriate nature of distress.
Undesignated
Fire/Explosion
Flooding
Collision
Grounding
If nature of distress is not specified, "Undesignated" is auto-
matically selected.
12.Press [Enter] to close the list.
13.Press [ ] to go to the Course and/or Speed entry. Enter course
and/or speed if they are different from what appears on the screen.
14.Press [Esc]. You are now asked to update data entered.
*Current update is shown at the position display of the bottom right corner.
Figure 6-2 Distress Alert setup, requesting confirmation of
settings
15.Press [Enter] to register data you've just entered.
Figure 6-3 Distress Alert setup, distress alert updated
Listing
Sinking
Disabled & Adrift
Abandoning ship
Further assistance required
Piracy or Armed Attack