Using The Scsiselect Utility - NEC ES1200 User Manual

Using the SCSISelect Utility

To run the SCSISelect Utility, perform the following
procedure:
1. Insert the bootable Utilities diskette into floppy disk
drive A.
2. Power-on the system. The system boots up.
3. The MS-DOS Startup Menu displays. See Table 4-6.
4. Select 2. Execute AIC-78xx SCSISelect Utility from
the MS-DOS Startup Menu. The SCSISelect Utility
starts and the following screen is displayed:
SCREEN
Configure/View Host Adapter
Settings
SCSI Disk Utilities
5. If you wish to format a disk, verify disk media, or
display a list of devices and their SCSI IDs, select
"SCSI Disk Utilities". If you wish to configure the
adapter or a device, select "Configure/View Host
Adapter Settings".
DESCRIPTION
Configure host adapter
and device settings.
The utility scans the SCSI
bus for SCSI devices,
reports a description of
each device. Run these
utilities before configuring
SCSI devices.
Configuring Your System
4-23