Installing An Option Board - NEC ES1200 User Manual

Installing an Option Board

1. Power off the system and remove the left side panel
as described earlier in this chapter.
2. Remove and save the expansion slot screw and cover
(Figure 5-7, A and B).
Figure 5-7. Removing the Expansion Slot Screw and Cover
A
B
Notice: Observe static precautions. Use an antistatic
wrist strap.
3. Remove the option board from its protective wrapper,
holding the board only by the edges. Do not touch the
board components or the gold connectors.
4. Record the option board serial number in the
equipment log.
5. Set any board jumpers or switches as described in
the documentation that comes with the option board.
Upgrades and Options
5-17