Chapter; Making Connections - NEC ES1200 User Manual

Making Connections

Note: If your system normally operates without a video
display or keyboard (for example, as a network server),
you must install a video display and keyboard to
configure the system. You may remove them after
running the Resource Configuration Utility (RCU). For
information on running the RCU, refer to Configuring
Your System in Chapter 4 of this User's Guide.
Refer to Figure 3-3 and connect your keyboard, monitor,
and mouse. Connect any external peripheral devices
such as a printer or modem by following the
instructions included with these devices.
Notice: Damage to the system may result if the
keyboard/mouse cable is inserted or removed when
power is applied to the system.
Caution: Inserting a telephone line connector into a
LAN board RJ-45 port may result in personal injury and
equipment damage
3-5
Setup