Rcu Configuration Settings - NEC ES1200 User Manual

4-6

RCU Configuration Settings

MAIN MENU
System - Express 5800 ES1200 System Board
Mouse Controller
RS - 232 COM Port 1
RS - 232 COM Port 2
Parallel Port
Floppy Controller
PCI-2 - PCI Ethernet Controller
PCI Function 1
PCI-3 - PCI Ethernet Controller
PCI Function 1
Embedded - PCI SCSI Controller
PCI Function 1
Embedded - PCI IDE Controller
PCI Function 2
Standard IDE Resources
Embedded - PCI VGA Controller
PCI Function 1
Standard VGA Resources
Configuring Your System
Table 4-3 shows the recommended RCU settings for a
sample system and provides a place for you to record
any changes you make to the settings. To display the
configuration settings, select Step 3 under the Resource
Configuration Utility Menu. To edit any of the
configuration parameters, use the up and down arrows
to highlight the desired configuration parameter and
press ENTER. Pressing F6 at this point, allows you to
edit any of the parameters resources (IRQs, DMAs, I/O
ports or memory).
Table 4-3. RCU Configurations
NORMAL SETTING
Enabled
PORT 3F8h - 3FFh IRQ 4
PORT 2F8h - 2FFh IRQ 3
PORT 378h - 37Fh IRQ 7
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
YOUR
CONFIGURATION