Chapter. - NEC ES1200 User Manual

5-6
Upgrades and Options
Figure 5-2. Replacing the Non-Volatile Memory
1. Power off the system and remove the left side panel
as described earlier in this chapter.
2. Using a IC removal tool or a small pointed tool,
gently pry up each end of the non-volatile memory
and pull it straight up out of its socket (Figure 5-2).
3. Orient the new chip over its socket so the dot is
properly oriented. Carefully insert the chip into its
socket connectors.
4. Press down on the chip until it is firmly seated in its
socket.
5. Replace the left side panel and turn on the system.
6. Run the BIOS SETUP to restore proper configuration
settings.