NEC ES1200 User Manual page 42

4-4
MENU OPTIONS
Learn about configuring
your computer
Configure computer
Set date
Set time
Maintain system
configuration diskette
Exit from this utility
Configuring Your System
Table 4-1. Resource Configuration Utility Main Menu
Provides basic instructions on resource configuration and using the Help
program.
Lists automatically detected boards, and enables manually adding, moving
and removing boards. Plug-and-Play boards don't require configuration
files. If the ISA board requires configuration files, use "Add or remove
boards" for a menu to enter or change ISA board configurations. (Refer to
ISA Board Configuration found later in this chapter).
INSERT adds a board not detected or has not been installed.
DEL removes a selected board.
F7 moves a selected board to a different slot.
Enables viewing and changing the date that the computer uses.
Enables viewing and changing the time that the computer uses.
Enables viewing and changing Configuration (.CFG) files and System
Configuration Information (SCI) files.
Exits from the RCU.
6. Select Learn about configuring your computer from
the RCU Main Menu and press ENTER if you need
information on system configuration. Read through
the information and press the F10 key when you are
done.
7. Using the up and down arrows highlight Configure
Computer and press ENTER. The Resource
Configuration Utility Menu shown in Table 4-2
displays. The keys that are active while viewing a
screen, are displayed on the bottom of the screen.
Note: Press the F1 key at any time for help and
additional information on each option. To return
from help, press the ESC key.
8. Select Step 1: Important Resource Configuration
information and press ENTER to learn more about
the Resource Configuration Utility.
9. Select Step 2 to add an ISA board to your system.
Refer to "ISA Board Configuration" in this chapter.
DESCRIPTION