Table of Contents
Advertisement
KH98 User Manual
Stacking and Rack Mounting
The KH98 can be stacked on the desktop or rack mounted by a variety of
different methods in 1U of rack space. The procedures for each method are
described in the following sections.
Note: Allow at least 5.1 cm on each side for adequate ventilation and 12.7 cm
at the rear for power cord and cable clearance.
Stacking
The KH98 can be placed on any level surface that can safely support its weight
and the weight of the attached cables. Ensure that the surface is clean and free
of materials that can block the exhaust vents or otherwise interfere with normal
operation of the switch. A foot pad set is included with the unit. Peel the
protective backing off of the foot pads, and then affix the foot pads to the
bottom panel of the KH98 at the corners, as shown in the diagram below.
56
Advertisement
Table of Contents
