Table of Contents
Advertisement
F2 LIST:
This function lets you broaden or narrow the scope of which ports the OSD
displays (lists) on the Main Screen. Many of the OSD functions only operate
on the computers currently selected for Listing on the Main Screen with this
function. The submenu choices and their meanings are given in the table
below:
Choice
ALL
POWERED ON
QVIEW
QVIEW +
POWERED ON
Note: Only the Administrator has the rights to designates which ports are
Quick View ports (see page 28, for details).
To select ports for the LIST:
1. Move the Highlight Bar to the choice you want, then press [Enter]. An
icon appears before the choice to indicate that it is the currently selected
one.
2. After you make your choice and press [Enter], you return to the OSD
Main Screen with the newly formulated List displayed.
Lists all of the ports on the installation.
Lists only the ports that have their attached computers Powered
On.
Lists only the ports that have been selected as Quick View Ports
(see SET ACCESSIBLE PORTS, p. 28).
Lists only the ports that have been selected as Quick View Ports
(see SET QUICK VIEW PORTS, p. 28), and that have their
attached computers Powered On.
Chapter 3. OSD Operation
Meaning
23
Advertisement
Table of Contents
