Hardware Setup; Stacking And Rack Mounting; Stacking - ATEN VS0801A User Manual

8-port vga switch with auto switching

Hide thumbs Also See for VS0801A:

Table of Contents

1. Important safety information regarding the placement of this

device is provided on page 36. Please review it before

proceeding.

2. Make sure that the power to all devices you will be installing

have been turned off and that all devices are properly grounded.

The VS0801A can be stacked on a desktop or rack mounted in a variety of

ways. The following sections take you through the procedures for each method.

The VS0801A can be placed on any appropriate level surface that can safely

support its weight with cables attached. To stack units, remove the cover

material from the bottom of the rubber feet that came with your package, and

stick them to the bottom panel at the corners, as shown in the diagram on the

following page:

Hardware Setup

Chapter 2

Table of Contents