Powering Off And Restarting - ATEN Altusen KH98 User Manual

Powering Off and Restarting

If it becomes necessary to Power Off one of the KH98 units, before starting it
back up you must do the following:
1. Shut down all the computers that are attached to the unit. If there are
stations cascaded down from it, all the cascaded stations and the
computers attached to them must be shut down, as well.
Note: 1. You must unplug the power cords of any computers that have the
Keyboard Power On function that are connected to the shut down
switches. Otherwise, the switches will still receive power from
the computers.
2. If the unit is operating under external power, unplug the power
adapter cable.
2. Wait 10 seconds, then plug the stations back in, starting with the lowest
stations in the chain and working back to the station you originally shut
down.
3. After all the KH98's are up, power On the computers, starting with the
ones attached to the lowest stations in the chain and working back to the
station you originally shut down.
Chapter 2. Hardware Setup
15