ATEN Altusen KH98 User Manual page 25

4. Use KVM cable sets (described in the Cables section, page 3), to connect
any available KVM port on the Second Stage unit to the Keyboard, Video,
and Mouse ports of the computers you are installing.
5. Plug the power cord that came with this package into the KH98's Power
Socket, and then into an AC power source.
6. Repeat the previous steps for any other Second Stage units you wish to
connect.
7. Power on the monitor.
8. Power on the First Stage unit(s), then power on the Second Stage unit.
9. Turn on the power to all the computers.
Note: The Power On sequence requires that all First Stage units be
powered on first. After they are all on, the Second Stage units must
be powered on next. After completing this sequence, power on the
computers.
LAN
POWER
LAN
LAN
POWER
BMC BMC BMC
(Out of Band)
BMC BMC BMC BMC
(Out of Band)
Chapter 2. Hardware Setup
11