Table of Contents
Advertisement
Rear View
1
2
3
LAN
6
1. Power Socket
2. Power Switch
3. LAN Port (IPMI)
The Category 5 cable used to connect the KH98 to the IPMI Management
LAN plugs in this RJ-45 connector. See diagram on page 10 for details.
4. Console Port Section
If this is a first station unit, your monitor, keyboard and mouse plug in
here.
If this is a daisy chained unit, the cables that link back to a port on a
higher KH98 unit plug in here.
5. KVM Port Section (CPU Port Section)
The cables that link to the computers plug in here.
6. Firmware Upgrade Section
Firmware Upgrade Switch
During normal operation this switch should be in the NORMAL
position.
Firmware Upgrade Port
The Firmware Upgrade Cable that transfers the firmware upgrade data
from the administrator's computer to the KH98 plugs into this RJ-11
connector.
Note: See page 43 for firmware upgrading details.
4
Chapter 1. Introduction
5
7
Advertisement
Table of Contents
