ATEN Altusen KH98 User Manual page 42

KH98 User Manual
(Continued from previous page.)
Setting
SET QUICK
VIEW PORTS
SET
ACCESSIBLE
PORTS
28
This function lets the Administrator select which Ports to include as
Quick View ports.
To select/deselect a port as a Quick View Port, Double Click the
port you want, or use the Navigation Keys to move the highlight
bar to it, then press [Enter].
When a port has been selected as a Quick View Port, an
arrowhead displays in the QV column of the LIST on the Main
Screen to indicate so. When a port is deselected, the arrowhead
disappears.
If one of the Quick View options is chosen for the LIST view (see
F2 LIST, p. 23), only a Port that has been selected here will
display on the List.
If one of the Quick View options is chosen for Auto Scanning
(see SCAN MODE, p. 25), only a Port that has been selected
here will be Auto Scanned.
The default is for no ports to be selected.
This function allows the Administrator to define User access to the
computers on the installation on a Port-by-Port basis.
For each User, select the target Port; then press the [Spacebar] to
cycle through the choices:
F (Full access)
V (View Only), or
Blank (A blank setting means that no access rights are granted.
The Port will not show up on the User's LIST on the Main Screen.)
Repeat until all access rights have been set, then press [Enter].
The default is F for all users on all Ports.
A blank setting means no access rights are granted. The port will
not show up on the main screen's User List.
Function
(Continues on next page.)