Table of Contents
Advertisement
System Requirements
Console
A VGA, SVGA, or Multisync monitor capable of the highest resolution
you will be using on any computer in the installation.
A PS/2 style mouse
A PS/2 style keyboard
Computer
The following equipment must be installed on each computer:
A VGA, SVGA or Multisync card.
A 6-pin mini-DIN (PS/2 style) mouse port.
A 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and
Ground on pin 3, or a keyboard port with +5V DC on pin 5 and ground on
pin 4. (See the note under Cables in the next section).
A Cat 5 cable for IPMI health monitoring (only for IPMI enabled servers)
Cables
Use of substandard cables may damage the connected devices or degrade
overall performance. For optimum signal integrity and to simplify the layout,
we strongly recommend that you use the following high quality Custom Cable
sets:
Cable Purpose
Connect to Computer
Cascading
2L-1001P/C (1.8m) or 2L-1003P/C (3m)
Chapter 1. Introduction
Part Number
3
Advertisement
Table of Contents
