Stacking And Rack Mounting; Stacking - ATEN Altusen KH1516A User Manual

KH1508A / KH1516A / KH1532A User Manual

Stacking and Rack Mounting

The KH1508A / KH1516A/ KH1532A can be stacked on the desktop or rack
mounted at the front or rear of the rack. The following sections take you
through the procedures for each method.
Note: 1. Allow at least 5.1 cm on each side for adequate ventilation and
12.7 cm at the rear for power cord and cable clearance.
2. The standard rack mount kit does not include rack mount screws or
cage nuts. If you need additional rack mount screws or cage nuts,
contact your rack dealer.

Stacking

The KH1508A / KH1516A/ KH1532A can be placed on any appropriate level
surface that can safely support its weight plus the weight of its attached cables.
To place the KH1508A / KH1516A/ KH1532A, or to stack units if you are
daisy chaining them, remove the backing material from the bottom of the
rubber feet that came with this package, and stick them onto the switch's
bottom panel at the corners, as shown in the diagram, below:
12