Basic System Configuration - 3Com 5500-SI Configuration Manual

460 C 22: F S
HAPTER ILE YSTEM
Basic System
Configuration
M
ANAGEMENT
Setting the System Name for the Switch
Perform the operation of
Table 508 Set the Name for the Switch
Operation
Set the Switch system name
Restore Switch system name to default value
Setting the System Clock
Perform the operation of
Table 509 Set the System Clock
Operation
Set the system clock
Setting the Time Zone
You can configure the name of the local time zone and the time difference between
the local time and the standard Universal Time Coordinated (UTC).
Perform the following operations in the User View.
Table 510 Setting the Time Zone
Operation
Set the local time
Restore to the default UTC time zone
By default, the UTC time zone is adopted.
Setting the Summer Time
You can set the name, start and end time of the summer time.
Perform the following operations in the User View.
Table 511 Setting the Summer Time
Operation
Set the name and range of the summer
time
Remove the setting of the summer time undo clock summer-time
By default, the summer time is not set.
command in the System View.
sysname
Command
sysname sysname
undo sysname
command in the User View.
clock datetime
Command
clock datetime time date
Command
clock timezone zone_name { add | minus
} HH:MM:SS
undo clock timezone
Command
clock summer-time zone_name { one-off
| repeating } start-time start-date
end-time end-date offset-time