3Com 5500-SI Configuration Manual page 634

634 C B: RADIUS S
HAPTER
RADIUS C S
ERVER AND LIENT
e Give the policy a name, for example EAP-TLS, and select Next.
f Click Add...
g Set the conditions for using the policy to access the network.
Select Day-And-Time-Restrictions, and click Add...
Click Permitted, then OK. Select Next.
h Select Grant remote access permission, and select Next
i Click on Edit Profile... and select the Authentication tab. Ensure Extensible
Authentication Protocol is selected, and Smart Card or other Certificate is set.
Deselect any other authentication methods listed. Click OK.
j Click the Configure button next to the EAP type selector.
ETUP