File Operation; Storage Device Operation - 3Com 5500-SI Configuration Manual

440 C 22: F S
HAPTER ILE YSTEM

File Operation

Storage Device
Operation
M
ANAGEMENT
The file system can be used to delete or undelete a file and permanently delete a file.
Also, it can be used to display file contents, rename, copy and move a file and display
the information about a specified file.
Using the
delete file-url
on the flash file system and does not free flash space. The file can be recovered using
the command. To delete a file and free space on the flash file system use
undelete
the
delete /unreserved file-url
space is made available on the flash file system for additional information. To ensure
that all deleted files have been removed from the system use the
command, this will prompt for removal of all files in the file system.
When operating in a stack of switches to clear space the user has to change to the
flash of each switch in the stack separately and then clear space in the file system of
each switch in turn. Use the
different switches file system or the
command "reset recycle".
You can use the following commands to perform file operations.
Perform the following configuration in User View.
Table 474 File Operation
Operation
Update the software on the whole fabric
Delete a file
Undelete a file
Delete a file from the recycle bin permanently
View contents of a file
Rename a file
Copy a file
Move a file
Display the information about directories or files dir [ / all ] [ file-url
Perform the following configuration in System View.
Table 475 Execute the Specified Batch File
Operation
Execute the specified batch file
The file system can be used to format a specified memory device. You can use the
following commands to format a specified memory device.
Perform the following configuration in User View.
Table 476 Storage Device Operation
Operation
Format the storage device
command to delete a file, leaves the contents of the file
command. Using this command will ensure that
command for changing focus to a
cd directory
unit2>flash: device name
Command
update fabric file-name
delete [ /unreserved ] file-url
undelete file-url
reset recycle-bin file-url
more file-url
rename fileurl-source fileurl-dest
copy fileurl-source fileurl-dest
move fileurl-source fileurl-dest
Command
execute filename
Command
format filesystem
reset recycle-bin
parameter for the
✽