Configuring Wred Operation; Configuring Control Over Telnet - 3Com 5500-SI Configuration Manual

366 C 19: ACL C
HAPTER
Configuring WRED
Operation
Configuring Control
Over Telnet
ONFIGURATION
Table 385 Configuring Traffic Statistics
Operation
Configure traffic
statistics
Cancel the
configuration of traffic
statistics
Display the statistics
information
For details about the command, refer to the Command Reference Manual.
The function of WRED Operation is to avoid congestion in advance.
Perform the following configuration in the Ethernet Port View.
Table 386 Configuring WRED Operation
Operation
Configure WRED Operation
Cancel the configuration of WRED
Operation
For details about the command, refer to the Command Reference Manual.
Table 387 describes the configuration specifications for control over logged in users.
Table 387 Control over logged in users
Login mode Control Method
Telnet Control Telnet using
source IP
Control Telnet using
source IP and
destination IP
Control Telnet using
source MAC
Configuration Preparation
Decide the control policy over Telnet, configuring the source IP, destination IP, and
source MAC to control over. Also specify whether the control action is permitting or
denying access.
Controlling Telnet using Source IP
This configuration can be implemented by means of basic ACL, which ranges from
2000 to 2999.
Table 388 Control Telnet using source IP
Configuration Procedure
Enter system view
Command
traffic-statistic inbound { user-group acl_number [
rule rule ] | ip-group acl_number [ rule rule [
link-group acl_number rule rule ] ] | link-group
acl_number [ rule rule ] }
undo traffic-statistic
acl_number [ rule rule ] | ip-group acl_number [ rule
rule [ link-group acl_number rule rule ] ] |
link-group acl_number [ rule rule ] }
display qos-interface { interface_name |
interface_type interface_num | unit_id }
traffic-statistic
Command
wred queue_index qstart probability
undo wred queue_index
Implementation
Implement by
means of basic ACL
Implement by
means of advanced
ACL
Implement by
means of Layer 2
ACL
Command
system-view
inbound { user-group
Relevant links
1.9.2 Controlling Telnet using
Source IP
1.9.3 Controlling Telnet using
Source IP and Destination IP
1.9.3 Controlling Telnet using
Source MAC
Description
—