3Com 5500-SI Configuration Manual page 470

470 C 22: F S
HAPTER ILE YSTEM
M
ANAGEMENT
Table 520 Module Names in Logging Information
Module name
IP
IPC
IPMC
L2INF
LACL
LQOS
LS
MPM
NTP
PPRDT
PTVL
QACL
QOSF
RDS
RM
RMON
RSA
RTPRO
SHELL
SNMP
SOCKET
SSH
STP
SYSMIB
TELNET
UDPH
VFS
VTY
WCN
XM
Note that there is a slash ('/') between module name and severity.
5 Severity
Switch information falls into three categories: log information, debugging
information and trap information. The info-center classifies every kind of information
into 8 severity or urgent levels. The log filtering rule is that the system prohibits
outputting the information whose severity level is greater than the set threshold. The
more urgent the logging packet is, the smaller its severity level. The level represented
by "emergencies" is 1, and that represented by "debugging" is 8. Therefore, when
the threshold of the severity level is "debugging", the system will output all the
information.
Definition of severity in logging information is in Table 521.
Description
IP module
Inter-process communication module
IP multicast module
Interface management module
LANswitch ACL module
LANswitch QoS module
Local server module
Multicast port management module
Network time protocol module
Protocol packet redirection module
Driver port, VLAN (Port and VLAN) module
QoS/ACL module
Qos profile module
Radius module
Routing management
Remote monitor module
Revest, shamir and adleman encryption system
Routing protocol
User interface
Simple network management protocol
Socket
Secure shell module
Spanning tree protocol module
System MIB module
Telnet module
UDP helper module
Virtual file system module
Virtual type terminal module
Web management module
XModem module