Table of Contents
Advertisement
Set "L-side down" when the Built-In AIT Auto-Loader Unit
is installed vertically with its left side down.
Press the SELECT button to place the cursor ( ) at the
required item. To cancel selection and return to the menu
screen, press the EJECT button.
By pressing the ENTER button after selection, the setting
value is saved and the menu screen appears again.
The specified orientation becomes effective when the menu
screen changes to the standard LCD indication.
Language
- Set the displayed language -
Important
Before setting "Language", remove the magazine from the Built-In AIT Auto-Loader Unit. Other-
wise, you cannot change the "Language" setting.
When selecting "Language" from the menu screen, the sub menu as shown at right appears.
On this screen, you can set the language of messages to be
displayed in the LCD.
You can select English, French, German or Spanish.
Press the SELECT button to place the cursor ( ) at the
required language. To cancel selection and return to the
menu screen, press the EJECT button.
By pressing the ENTER button after selection, the setting
value is saved and the main menu appears again.
Hint
On the menu screen, the messages are always displayed in English.
Orientation
English
French
German
Spanish
Built-In AIT Auto-Loader Unit 25
Advertisement
Table of Contents
