Table of Contents
Advertisement
4
In the same manner as in step 2,
push out AIT data cartridges No. 2
and No. 3 and remove them from the
magazine.
5
Face the magazine slot upward.
Shake it up and down and apply a
soft material such as a palm to the
magazine.
Then, the AIT data cartridges set in
the upper row shift down to the
lower row.
6
In the same manner as in step 2,
push out AIT data cartridge No. 4
and remove it from the magazine.
Built-In AIT Auto-Loader Unit 15
Advertisement
Table of Contents
