Cleaning; Cleaning The Read/Write Head - NEC N8551-29F Instruction Manual

Cleaning

To keep the Built-In AIT Auto-Loader Unit in the best condition, regular cleaning is required.

Cleaning the read/write head

When a message "CleanReq" appears in the LCD message area, clean the read/write head within
the Built-In AIT Auto-Loader Unit.
Important
• Use our "AIT Cleaning Cartridge" to clean the
Built-In AIT Auto-Loader Unit. If you use a
cleaner of other manufacturer, a machine
failure may be caused.
• Do not touch the cleaning cartridge tape
surface or rewind the tape.
• You can use the cleaning cartridge for about
70 times. When the STATUS lamp blinks (at a
given interval) during cleaning, the cleaning
cartridge tape comes to the end. (Eject the
cleaning cartridge tape and check that all the
tapes are wound around the right reel.)
Purchase a new cleaning cartridge tape.
1
Set a cleaning cartridge and three AIT data cartridges in the magazine.
Set them in the order described in "Setting AIT data cartridge" in the "Handling" section.
2
Set the magazine in the Built-In AIT Auto-Loader Unit.
3
Press the SELECT button to select the cartridge number of the cleaning cartridge.
Refer to P. 17 to select the cartridge number.
26 Built-In AIT Auto-Loader Unit