Names; System Administrator Doesn't Hear Help Message; Time And Date Cuts Replaces Top Line Of Display; Voice Prompts Affected By User's Voice - NEC DS2000 Release Notes

Hide thumbs Also See for DS2000:
Table of Contents

Advertisement

DS2000 03.20.07 Release Notes
Software Corrections in 03.20.07
System Administrator Cannot Record Subscriber Names

System Administrator Doesn't Hear Help Message

Time and Date Cuts Replaces Top Line of Display

Voice Prompts Affected By User's Voice

Time And Date Stamp Doesn't Play Caller's Number

Voice Prompts Stop After Listening To Recorded Name

Language Selection

Class of Service Doesn't Turn Off Soft Keys

28 ◆ 03.20.07
for a 8008-Dial Action Table # key depression when the Action = LOGON and Data = N. In addi-
tion, pressing # three times in succession could cause a system reset. This is corrected in software
version 03.20.07.
Note that by default the # key depression for Dial Action Table 1 Action = LOGON and Data =
IXXX, so the prompt will not play.
In prior 03.**.** software versions, the System Administrator could only re-record names for other
Subscriber Mailboxes if:
The administrator's name had already been recorded.
OR
The administrator first deleted the Subscriber Mailbox name.
This is corrected in software version 03.20.07.
If the System Administrator tries to listen to an Instruction Menu, Announcement, or Music on
Hold message that has not been recorded, they hear, "The greeting has not been recorded" followed
by a help message explaining their options. In prior 03.**.** software versions, the help message
would not play.
In prior 03.**.** software versions, the Time and Date display would occasionally replace the Intr-
aMail prompts during certain feature operations. This no long occurs in version 03.20.07.
In prior 03.**.** software versions, a user could speak near their phone while a voice prompt was
playing and the voice prompt volume would decrease. This was because the telephone microphone
would pick up their voice and affect the volume of the playing prompt. This interaction no longer
occurs in software version 03.20.07.
If a trunk call is transferred to an extension's mailbox using ICM + Extension number + MW , the
user can dial TI while listening to the message to hear the following:
The date the message was sent.
The time the message was sent.
With Caller ID installed, the number of the outside caller that left the message.
In prior versions of 03.**.** software, TI would announce the extension number of the receiving
trunk rather than the outside caller's number.
In software versions prior to 03.20.07, the voice prompt help messages would stop after a user
pressed L to listen to their recorded mailbox name. In version 03.20.07, the voice prompt help mes-
sages play normally as soon as IntraMail plays the recorded name.
When 0101-Allow Language Programming and 0101-Allow Name Programming are disabled
(N), the NAME and LANGUAGE soft keys do not appear on the Super Display Telephone. In prior
DS2000 Release Notes

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS2000 and is the answer not in the manual?

Table of Contents