Table of Contents
Advertisement
Unload
– Unload settings –
When selecting "Unload" from the menu screen, the sub
menu appears as shown on the right.
On this screen, you can set cartridge operations using the
Unload command when the fourth cartridge is loaded in the
read/write drive.
OFF: The cartridge is returned to the magazine, and the
command finishes. (Default setting)
Use this mode for normal operation.
ON: The cartridge is returned to the magazine, and the first
cartridge is loaded into the drive.
1
Press the SELECT button to place the cursor (
and return to the menu screen, press the EJECT button.
2
By pressing the ENTER button after selection, the setting value is saved and the menu screen
appears again.
Contrast
- Adjust brightness -
When selecting "Contrast" from the menu screen, the sub
menu as shown at right appears.
On this screen, you can control the LCD brightness
(contrast).
Every time you press the SELECT button, the black
indicator scales increase to brighten the screen. By pressing
the SELECT button when the seven indicator scales turn
black, all of them turn white again. (Contrast returns to the
darkest setting.)
After controlling contrast, press the EJECT button to save
the current setting and return to the menu screen.
Unload
Continuous
OFF
ON
) at the required item. To cancel the selection
Contrast
Adjustment
Built-In AIT Auto-Loader Unit 23
Advertisement
Table of Contents
