Part Name And Function; Front - NEC N8551-29F Instruction Manual

Part Name and Function

The Built-In AIT Auto-Loader Unit and magazine have the following parts and functions.

Front

Magazine slot
A slot in which the magazine is set
( P. 16)
EJECT button
Press this button when ejecting the magazine from
the Built-In AIT Auto-Loader Unit. (
SELECT button
Press this button when selecting which AIT data
cartridge of four mounted on the magazine is to be
used. ( P. 17)
You can also use this when creating a menu using
a LCD. ( P. 21)
ENTER button
Press this button when setting the AIT data
cartridge selected with SELECT button in the read/
write drive in within the Built-In AIT Auto-Loader
Unit. ( P. 17)
You can also use this when creating a menu using
a LCD. ( P. 21)
2 Built-In AIT Auto-Loader Unit
LCD
An indicator which shows the status of the Built-In
AIT Auto-Loader Unit and the AIT data cartridge set
in the Built-In AIT Auto-Loader Unit (
You can also use this when creating a menu using
a LCD. (
The LCD shows an error message when an error
P. 18)
occurs in the Built-In AIT Auto-Loader Unit.
(
BUSY lamp
An indicator which shows the data communication
status (
TAPE lamp
An indicator which shows the status of the AIT data
cartridge (
P. 21)
P. 36)
P.20)
P. 20)
P. 18)