Ejecting The Ait Data Cartridge - NEC N8551-29F Instruction Manual

Ejecting the AIT data cartridge

Eject the AIT data cartridge set in the
magazine as shown below.
1
Direct the magazine bottom toward
you and hold the magazine up-
rightly.
Check
Do not face the magazine slot down-
ward when ejecting the cartridge. The
cartridge may fall and get damaged.
2
While holding down the release key
on the magazine, push out the
cartridge along the magazine groove.
AIT data cartridge No. 1 is slightly
ejected from the slot.
3
Remove the cartridge from the
magazine by holding its both edges.
14 Built-In AIT Auto-Loader Unit