NEC N8551-29F Instruction Manual page 9

• Do not move the unit with the cartridges and magazine set.
If the unit is subject to shock, the unit and cartridges may be damaged.
• Remove the cartridges from this unit when not using it, or before turning off the power.
Not doing so may shorten the life of your cartridges and cause a machine malfunction.
When using the Built-In AIT Auto-Loader Unit, remove the magazine, or make sure the
cartridge is returned to the magazine before turning off the power.
• Do not leave the cartridges and magazine protruding from the unit's magazine slot for extended
periods of time.
This may shorten the life of your cartridges and cause a machine malfunction.
Magazine
• Do not insert the magazine in the Built-In AIT Auto-Loader Unit when a cartridge is ejected
from the magazine slot.
This will cause machine failure or operation error.
• Do not store the magazine in a dusty, humid place or in a place subject to direct sunlight.
Data within the data cartridge set in the magazine may be damaged.
• Do not store the magazine in a place subject to drastic temperature fluctuations.
Data within the data cartridge set in the magazine may be damaged.
• Do not store the magazine in a place subject to strong vibrations.
The magazine may be damaged and data within the data cartridge set in the magazine may
be damaged.
• Do not store the magazine in a place subject to corrosive gas, chemicals or splashing of chemi-
cals.
The magazine may get deformed or damaged and may not operate correctly. Data within
the data cartridge set in the magazine may be damaged.
• Store the magazine in the provided case.
Data within the data cartridge set in the magazine may be damaged.
• Store the magazine in the special magazine case.
Not doing so may damage the magazine.
• Do not put a load on the magazine when using or storing it.
Data within the data cartridge set in the magazine may be damaged.
ix