NEC N8551-29F Instruction Manual page 31

Important
• If the AIT data cartridges are not set correctly in
the magazine, the safety lock on the magazine is
protruding, preventing the magazine from being
inserted into this unit. Check that the safety lock is
not protruding before inserting the magazine.
Further, do not force the magazine into this unit
when the safety lock is protruding. This will result
in damaging the safety lock, the magazine and
other components, and the AIT data cartridges.
• The following precautions are written on the top
of the magazine.
• Do not swing around the magazine in which the AIT data cartridges are set.
Check
• After insertion, check that the AIT data cartridges will
not come off by turning over the magazine slot.
• Check that no cartridge is ejected from the magazine
slot.
Insert cartridges carefully.
Do not insert the magazine when a cartridge is
ejected. This may cause a machine failure or
operational malfunction.
Safety lock
Built-In AIT Auto-Loader Unit 13