Virtual Tach System; System - Autostart AS-3472TW-FM Installation Manual

FEATURE 5 – Ignition Valet
OPTION 1
OPTION 2*
MENU 3
FEATURE 1 – Home Valet
OPTION 1
OPTION 2*
FEATURE 2 – AUX 1 Programming
OPTION 1
OPTION 2*
OPTION 3
FEATURE 3 – AUX 2 Programming
OPTION 1
OPTION 2*
OPTION 3
OPTION 4
FEATURE 4 – AUX 3 / Zone 3 Programming
OPTION 1
OPTION 2*
OPTION 3
FEATURE 5 – External Trigger
OPTION 1
OPTION 2*
OPTION 3
OPTION 4
MENU 4
FEATURE 1 – Alarm Control
OPTION 1
OPTION 2*
FEATURE 2 - Ready Mode Option
OPTION 1
OPTION 2*
FEATURE 3 – Bypass
OPTION 1
OPTION 2 *
OPTION 3
FEATURE 4 – Bypass Type
OPTION 1
OPTION 2 *

Virtual Tach System

*
Virtual Tach System combines the latest microcontroller technology and a complex algorithm
that took years to develop. VTS is able to effectively monitor the engine starting sequence and
release the starter at the right time without physically connecting the tach wire to the remote
starter. The VTS constantly monitors the data and readjusts itself automatically in order to
maximize its capability to start the engine properly in any weather or deteriorating battery condition
(automatic transmission only).
Optional Time Delay Adjustment in Virtual Tach System
Follow these steps to program crank time adjustment, if needed:
1. Enter programming mode (see on page 15)  the parking lights will stay on for up to 20
seconds.
2. Before the lights go out, press and hold the brake pedal and press the
buttons simultaneously  the parking lights will flash 4 times. Do not release the brake pedal.
3. Press the button if you wish to increase the time delay or the
LOCK
to decrease it. The time delay will be increased or decreased by 50ms. and the parking
lights will flash once every time the
P. 18
Ignition valet
DISABLED
Ignition valet
ENABLED
* INDICATES DEFAULT SETTING
Home valet
ENABLED
Home valet
DISABLED
Horn confirmation upon the 2
Priority door access
Horn confirmation upon the 1
Constant output while the
In safe start mode: activate AUX 2 by pressing the
Toggle (with 30-second time out)
ON/OFF
Toggle (with 4 minutes time out)
ON/OFF
Priority door access
1-sec. output when
run & data output (channel expander MCX-100 enabled)
Constant output while the
Disarm/rearm pulse with
Zone 3 disarm/rearm (trunk pin: a disarm pulse is sent before the trunk opens; the vehicle
rearms 4 seconds after the trunk is closed).
Key sense
Engine start/stop
Pager
* INDICATES DEFAULT SETTING
must be enabled)
ENABLED (HORN
DISABLED
Enabled by handbrake
Enabled by remote
ADS
Trilogix
Fortin
One-Way communication
Two -Way communication
LOCK
press of the
nd
LOCK
press of the
st
LOCK
then buttons are pressed.
F LOCK
active when under remote run
button is pressed for 3 sec. with ignition OFF or under remote
TRUNK
button is pressed
TRUNK
& data output (channel expander MCX-100 enabled)
TRUNK
or button is pressed.
UNLOCK
button.
button.
button.
START/STOP
and
LOCK
button if you want
UNLOCK
Installation Guide
UNLOCK