Valet Mode - Autostart AS-3472TW-FM Installation Manual

•
Within 3 seconds, press and hold the
The remote control will beep once, then once again when the
disappears.
The parking lights flash once.
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
•
Press the brake pedal:
•
If the vehicle is in cold weather mode, the parking lights will stay on while the
pedal is pressed.

Valet Mode

When your vehicle is in Valet Mode, the remote starter and alarm (if configured) functionalities are
disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent
the engine from being remote-started accidentally.
Any of the following features will put your remote car starter into Valet Mode:
• Ignition Valet:
• Remote valet:
• Valet switch:
• To put the system i n t o Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the
The parking lights will flash three times.
b. Turn the ignition
The LED on the antenna will come
successfully entered Valet mode.
The icon will appear on your LCD transmitter if you press
• To put the system i n t o Valet mode using the TRANSMITTER (Remote Valet Mode):
a. Press the
UNLOCK
The remote will beep once and then will beep once again when the
on the screen.
The parking lights will flash 3 times quickly and the LED on the antenna will come
solid to indicate that the vehicle has successfully entered Valet mode.
ON
• To put the system i n t o Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the
c. Within 5 seconds, press the push button switch until the parking lights flash 3 times.
d. Release the push button and turn the ignition to the
The LED on the antenna will come
successfully entered Valet mode.
The icon will appear on your LCD transmitter if you press
• To put the system o u t o f Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the
The parking lights will flash twice.
Installation Guide
This feature allows you to put your system into Valet Mode by
using the ignition key.
This feature allows you to put your system into Valet Mode by
using the transmitter.
This feature allows you to put your system into Valet Mode by using a
push button switch (optional).
To put the system i n t o Valet Mode
and
IGNITION/RUN
.
OFF
and
START/STOP
position.
ON
To put the system o u t o f Valet Mode
and
IGNITION/RUN
button for at least 3 seconds.
positions.
OFF
solid to indicate that the vehicle has
ON
buttons simultaneously for more than 3 seconds.
position.
OFF
solid to indicate that the vehicle has
ON
positions.
OFF
icon
or .
LOCK UNLOCK
icon appears
or .
LOCK UNLOCK
P. 25