Virtual Tach System; System - Autostart AS-3372 TW-FM Installation Manual

MENU 3
FEATURE 1 – Home Valet
OPTION 1
OPTION 2*
FEATURE 2 – AUX 1 Programming
OPTION 1
OPTION 2*
OPTION 3
FEATURE 3 – AUX 2 Programming
OPTION 1
OPTION 2*
OPTION 3
OPTION 4
FEATURE 4 – AUX 3 / Zone 3 Programming
OPTION 1
OPTION 2*
OPTION 3
FEATURE 5 – External Trigger
OPTION 1
OPTION 2*
OPTION 3
OPTION 4
MENU 4
FEATURE 1 – Multi-Level Features
OPTION 1
OPTION 2*
OPTION 3
OPTION 4
FEATURE 2 – Alarm Control
OPTION 1
OPTION 2*
FEATURE 3 – Ready Mode Option
OPTION 1
OPTION 2*
FEATURE 4 – Bypass
OPTION 1
OPTION 2*
OPTION 3
FEATURE 5 – Bypass Type
OPTION 1
OPTION 2 *

Virtual Tach System

*
Virtual Tach System combines the latest microcontroller technology and a complex algorithm
that took years to develop. VTS is able to effectively monitor the engine starting sequence and
release the starter at the right time without physically connecting the tach wire to the remote
starter. The VTS constantly monitors the data and readjusts itself automatically in order to
maximize its capability to start the engine properly in any weather or deteriorating battery condition
(automatic transmission only).
Optional Time Delay Adjustment in Virtual Tach System
Follow these steps to program crank time adjustment, if needed:
1. Enter programming mode (see on page 15)  the parking lights will stay on for up to 20
seconds.
2. Before the lights go out, press and hold the brake pedal and press the
buttons simultaneously  the parking lights will flash 4 times. Do not release the brake pedal.
P. 18
* indicates default setting
Home Valet
ENABLED
Home Valet
DISABLED
Horn confirmation upon the 2
Priority door access
Horn confirmation upon the 1
Constant output while pressing
In safe start mode: activate
Toggle (with 30-second time out)
ON/OFF
Toggle (with 4-minute time out)
ON/OFF
Priority door access
1-sec. output when
remote run & data output (channel expander MCX-100 enabled)
Constant output while the
Disarm/rearm pulse with
Zone 3 disarm/rearm (trunk pin: a disarm pulse is sent before the trunk opens; the vehicle
rearms 4 seconds after the trunk is closed).
Key sense
Engine start / stop
Pager
* indicates default setting
Multi-car Features, Basic Features, Customized Features
Basic Features, Multi-car Features, Customized Features
Customized Features, Multi-car Features, Basic Features
Basic Features, Customized Features, Multi-car Features
( must be enabled in MENU 3 FEATURE 2, option 1 or 3)
ENABLED HORN
DISABLED
Enabled by handbrake
Enabled by remote
ADS
Trilogix
Fortin
One-Way communication
Two-Way communication
press of the
nd
LOCK
press of the
st
LOCK
followed by
AUX
by pressing the
AUX 2
active when under remote run
button is pressed for 3 sec. with ignition OFF or under
TRUNK
button is pressed
TRUNK
& data output (channel expander MCX-100 enabled)
TRUNK
button
button
LOCK
/ button
START STOP
LOCK
and
UNLOCK
User Guide