Home Valet™" Mode - Autostart AS-3472TW-FM Installation Manual

b. Turn the ignition
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
The icon will appear on your LCD transmitter if you press
• To put the system o u t o f Valet mode using the TRANSMITTER (Remote Valet Mode):
a. Press the
UNLOCK
The remote will beep once and then will beep once again when the
disappears on the screen.
The parking lights will flash twice and the LED on the antenna will flash quickly to
indicate that the vehicle is now out of Valet mode.
• To put the system o u t o f Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the
c. Within 5 seconds, press the push button switch until the Parking lights flash twice.
d. Release the push button and turn the ignition to the
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
The icon will appear on your LCD transmitter if you press
The system will warn you if someone attempts to start your vehicle while it stands in Valet Mode:
The transmitter will beep twice.
The and
START/STOP
The parking lights will:
Turn then
ON
Flash twice.
"Home Valet™" Mode
If configured at installation, this feature will set the vehicle to a no-remote-start mode: if the vehicle
is parked indoors, there is no danger of it starting accidentally by remote control.
Note: Once the home valet mode is activated, the vehicle will not start by remote but the
OEM alarm functions will still be enabled.
To take the system i n t o home valet mode:
• Press the
or
• Within 3 seconds, press the
The transmitter will beep once and display
The parking lights will come
To take the system o u t o f home valet mode:
• Turn the ignition key to the
The system will warn you if someone attempts to start your vehicle while it stands in home valet
mode. The parking lights will:
1-
2-
3-
P. 26
.
OFF
and
START/STOP
position
ON
buttons will flash twice.
LOCK
; then
OFF
button.
and buttons simultaneously.
for 2 seconds.
ON
IGNITION ON (RUN)
Turn then
ON OFF
Flash twice, pause; then
Flash twice again.
buttons simultaneously for more than 3 seconds.
OFF
.
position.
; then
or
LOCK UNLOCK
position.
or
LOCK UNLOCK
Installation Guide
.
icon
.