Table of Contents
Advertisement
Panic Mode
Note: Panic mode can only be activated if the horn has been adequately configured.
In an emergency situation, you can activate panic mode by pressing and holding the
button for more than 3 seconds, until the horn starts honking. If the vehicle is under a remote start,
the engine will shutdown automatically before setting off the horn. You can stop the horn by
pressing:
(this will lock your doors and deactivate panic mode), or
(this will unlock your doors and deactivate panic mode).
Furthermore, the panic mode can be stopped by activating one of the following three (3) features:
a)
Remote valet (pressing
b)
Ignition valet (turning the key inside the ignition switch from
c)
By turning the key to the
parking lights flash 5 times.
Panic Mode will automatically shut down after 30 sec.
nd
The AUX 1 / 2
(Both
and
AUX 1
AUX 2
the user to unlock solely the driver's door with a single press of the
transmitter, and to unlock the other doors, if desired, by pressing the
time.
The output will provide a 1-second negative output when the
time on the transmitter. This can be used not only as priority door access, but also as trunk
release.
Horn Confirmation:
can be programmed to trigger the horn every time the
AUX 1
button is pressed twice within 3 seconds. When horn confirmation is activated, panic mode is
LOCK
enabled. If horn confirmation is disabled, panic mode will not be available.
The AUX 2 Timed Output
This 500 mA negative
programmed for priority door access if
information, please refer to the "3-pin Harness" section earlier in this Guide.
The AUX 3 / Trunk or Sunroof Output
This 500 mA negative
programmed to give a 1-second pulse when the
during a remote start), or to give a continuous output as long as the
sunroof or window control).
If the Option 3 is selected, a disarm pulse will be sent before the trunk is popped. An arm pulse will
be sent 4 seconds later. This option is overridden when the Zone 3 option is used as a trunk pin
(Menu 3, Feature 5, Option 1).
Programmable External Trigger
For additional information, please refer to the "12-pin Accessories Harness" section earlier in this
Guide.
OEM-Style Alarm
The OEM-style alarm (if configured) monitors the doors, hood and ignition switch of the vehicle. It
will sound the horn if a door or the hood is opened, or if the key is turned in the ignition (the horn
option must be enabled and one of the door inputs must be connected).
Installation Guide
UNLOCK
position and pressing the valet switch (if included) until the
ON
Unlock
can be programmed for Priority Door Access.)This great feature allows
output can be used for many different applications. It can be
AUX 2
AUX 1
output can be used for many different applications. The output can be
AUX 3
and
for at least 3 seconds)
START/STOP
UNLOCK
LOCK
is programmed for horn confirmation. For additional
button is pressed (if the ignition is
TRUNK
START/STOP
to
6 times in a row)
OFF
ON
button on the
UNLOCK
button for a second
UNLOCK
button is pressed a second
button is pressed, or when the
button is held down (for
TRUNK
or
OFF
P. 27
Hide quick links:
Advertisement
Table of Contents
