Hdd Data Cable Routing For Sas Raid Controller Cards In Sparc Enterprise T5240 Servers - Fujitsu SPARC ENTERPRISE T5140 Service Manual
Fujitsu server user manual
Hide thumbs
Also See for SPARC ENTERPRISE T5140:
- Product notes (138 pages) ,
- Installation manual (130 pages) ,
- Administration manual (76 pages)
Table of Contents
Advertisement
HDD Data Cable Routing for SAS RAID
Controller Cards in SPARC Enterprise
T5240 Servers
There are two SAS controller card options for the SPARC Enterprise T5140 and T5240
servers (both options support RAID). The standard option uses the on-board SAS
controller card preinstalled on every server. The second option is a StorageTek SAS
RAID Internal Host Bus Adapter (HBA) PCIe card. The internal cabling of your
server will be different depending on the SAS controller card option you choose.
HDD Data Cable Routing for SAS RAID Controller Cards in Eight- or
FIGURE:
Sixteen-Disk Capable SPARC Enterprise T5240 Servers
Figure Legend
1
Routing the first hard drive cable through the right notch on the motherboard handle
2
Routing the second hard drive cable through the left notch on the motherboard handle
3
Routing both hard drive cables between the two processors
4
Routing both cables through the fan midwall to the hard drive backplane
Identifying FRUs in SPARC Enterprise T5240 Servers
207
Advertisement
Table of Contents
